2.0 Controllers

2.1 - DRC model  DUMP RINSER CONTROLLER

  •  Fully programmable
  •  EEPROM Parameter memory (min. 10 year life)
  •  Parameter protection via access code
  •  All parameters set in software, no pots or switches
  •  Bright two digit LED display
  •  Chemically resistant membrane panel / keypad
  •  Kydex enclosure (easy to install in wet stations)
  •  Audio and visual (LED) alarms

       
Download the DRC Dump Rinser Controller Brochure


2.2  HSP HEATER SUB PANEL - The ISE HSP is for use with ISE and competitor 24V controllers.  The standard
        
        HSP  includes:·        
  • Control Relay
  • Safety Relay
  • Liquid Level connection
  • Process Thermocouple connection (standard. J type)
  • Overtemperature thermocouple connection (standard j type)

          OPTIONAL:  
  • Voltages - 208v - 480v etc.
  • Phase -1, 3 phase etc.
  • Amperage capacity - 10, 20, 40 amp etc.
  • Type thermocouple input - j, k, e type etc.

2.3 RM Model RESISTIVITY MONITOR - The ISE RM (not shown) is a microprocessor based Resistivity Controller with outputs for Alarm and/or Control purposes. Standard Features include:
    
  • Auto Ranging, 2 M OHMS-CM to 20 M OHMS-CM
  • Two Independent Cell (sensor) inputs (Cells optional)
  • BOTH CHANNELS SIMULTANEOUSLY MONITORED/CONTROLLED
  • 3-D (full) Curve Temperature Compensation CURVE TEMPERATURE
  • 2 ea. Programmable Alarm/Control Relays, Output Transistors (OCT)
  • 0-100 degrees C Temperature Measurement/Compensation
  • EEPROM Memory Retention (storage) 10 years without power
  • Audio and visual Alarms
  • Separate Alarm / Range Settings for each Cell
  • Programmable access code protection
  • Chemical resistant membrane style Bright LED readout
  • High Resolution 20K count A/D converter
2.4 T Model TIMER (not shown, similar in size and layout to QDR Controller shown above)
  •  Fully programmable
  •  Integrated bi-directional, full function timer
  •  EEPROM Parameter memory (min. 10 year life)
  •  Parameter protection via access code
  •  All parameters set in software, no pots or switches
  •  Bright two digit LED display
  •  Chemically resistant membrane panel / keypad
  •  Kydex enclosure (easy to install in wet stations)
  •  Audio and visual (LED) alarms
Picture coming
2.5 TTC Model TEMPERATURE TIMER CONTROLLER
         Features:
  •  PID Control, fully programmable
  •  EEPROM Parameter memory (min. 10 year life)
  •  Parameter protection via access code
  •  All parameters set in software, no pots or switches
  •  Bright four digit LED display
  •  Chemically resistant membrane panel / keypad
  •  Kydex enclosure (easy to install in wet stations)
  •  Integrated bi-directional, full function timer
  •  Audio and visual (LED) alarms
  •  Uses J Type process and overtemperature thermocouple's
  •  Thermocouple cold junction compensation
  •  Liquid Level Sensor Interlock
  •  Hi Limit Circuitry Independent of Microprocessor

          Download the TTC Model Temperature Timer Controller Brochure
TTC Used for KOH Bath/Etching Process
2.6 TTC-H5-24  5 Recipe TEMPERATURE TIMER CONTROLLER (TTC)

We are proud to offer a 5 recipe TTC.  The TTC-H5-24 incorporates all* the functions of the standard TTC-H-24 (see
description above) but enables the user to set up and store five separate process recipes. Each separate recipe includes:


·        Process Temperature Set Point
·        Hi (temperature) alarm Set Point
·        Lo (temperature) alarm Set Point
·        PID parameters
·        EEPROM Memory Retention (storage) 10 years without power

The H5 version is ideal for R&D, university and pilot programs where a single process bath is used for multiple processes.

*note: the RS232 function is not available on this model

         
    
     Download the TTC 5 recipe Temperature Timer Controller Brochure