Page 2 - IN-STOCK & SPECIALLY PRICED PRODUCTS

Thank you for visiting page 2 of the In-Stock & Specially Priced Product section of the ISE website!    Please note:

  • Most items listed can ship same day or next depending on when an order is  placed (unless otherwise noted)
  • Products are brand new unless otherwise noted. 
  • All used equipment is refurbished and warranted (unless sold “as is”).  
  • Please note that the availability of used equipment is limited and is offered on a first come, first served basis.  

ISE will also purchase surplus equipment and offers competitive prices.

  •    New, Used & Surplus Process Modules (Constant Temperature Baths, Filter Etch Baths etc.)
  •    New, Used & Surplus Lufran UPDI, Tytan Water Heaters, In Line Heaters, Temperature Control Circulators etc.

Section 6.0 - Process Modules, Tanks

   Item             Qty       PN, Description

    6.1                    0               SOLD!!! - New Lufran LTFE High Temperature Filter Etch  
                                                    System for use H3P04, SC1, SC2, KOH etc. to 180ºC SOLD!!

a) 1 ea. 8" cassette capacity.
b) 360 degree, PFA Teflon overflow weir w/ leveling feature.

c) Inner Moulded PFA Teflon Tank.
d) PTFE Teflon Heater with patented (patent numbers 4,553-024-
     4,158 764) N2 purge feature.
e) 208 VAC, single phase.
f) 4.5 kW Teflon Immersion Heater.
g) 2 ea. J-type overtemperature thermocouple, thermal cutoff

     switch
h) 1 ea. Teflon process thermocouple
i) Liquid level sensor
j) All Teflon pump with 1⁄2 hp water cooled motor
k) All Teflon Filter Housing (filter not included, optional see below)

l) Flow enclosure with Heater purge controls, bubble sensor,
    motor cooling and purge controls.

LTFE Process Control Package
a) Digital Self tuning, microprocessor based PID Temperature 
    Controller. Membrane control panel, LED readout.
b) Separate 208VAC Power Module
c) Integral Process Timer
d) Audio and visual alarms
e) Access code.

f) Nitrogen purge regulator and flow meter
    6.2                 2                LTI-3, New Teflon Impellers (for LTFE Lufran High Temperature Filter Etch System
• Injection molded rectangular tanks.
• Available in PFA or PVDF materials.
• Available in 200 mm, 150 mm and 125 mm wafer sizes.
• Available in single or dual capacity.
• Available with or without covers.
• Maximum recommended temperature limit for PVDF tanks is 130°C
• Maximum recommended temperature limit for the 200 mm PFA tanks is

    200°C
• For applications in which the contents of the 200 mm PFA tanks are heated, the bottom and sides of the tank must be fully supported such that the tank itself is not bearing the weight of the tank contents or associated components. The tank support structure must minimize deformation of the tank bottom and sidewalls that could occur in heated applications.

 ENTEGRIS Rectangular Process Tanks

   Item             Qty       PN, Description

   6.3                 2               TS5, 01-1720, RM10099, PFA Teflon Process Tank (Entegris)

  • Injection molded
  • ID  14.9"x10.2" x 10.75"
  • ID bottom  9" x 14"
  •  Capacity - 2 ea. 5" cassettes

   6.4                 4               LT5N, 01-1200, PFE87-01DU-0215   PFA Teflon Process Tank (Entegris)

  • Injection molded
  • 1 Solid Bung
  • 0.50" flange
  • ID  8" x 14.25" x 10"
  • ID bottom  7" x 13"
  •  Capacity - 2 ea. 5" cassettes

   6.5                 1               01-1355, IMT01-01DU-0215  PFA Teflon Process Tank (Entegris)

  • Injection molded
  • Straight Wall
  • Off-set – equal distance between center/wall)
  • 0.50" flange
  • ID  15" x 14.75"x 14.25"
  •  Capacity - 1 ea. 8" cassette

   6.6                 1               01-1485, IMT02-01-0215   PFA Teflon Process Tank (Entegris)

  • Injection molded
  • Straight Wall
  • 1" flange 2 ea. Hollow Drains (1 ea. Centered, 1 ea.
           Off-set – equal’ distance between center/wall)
  • 0.50" flange
  • ID  15" x 14.75"x 14.25"
  •  Capacity - 1 ea. 8" cassette

   6.7                 1               LT8, 01-1400   PFA Teflon Process Tank (Entegris)

  • Injection molded
  • With Bung
  • 1" flange
  • ID  11.625" x 22.75" x 15"
  • ID Bottom 10.5 x 21.5"
  •  Capacity - 2 ea. 8" cassettes

   6.8                1               LT8,  01-1420, IMT02-01-0215  PFA Teflon Process Tank (Entegris)

  • Injection molded
  • Note: same as LT8,01-1400 but Flat Bottom
  • 1" flange
  • ID  11.625" x 22.75" x 15"
  • ID Bottom 10.5 x 21.5"
  •  Capacity - 2 ea. 8" cassettes

   6.9                     1         Lufran Model FE52-S-V-MD, PVDF Filter Etch
                                           Bath


  • Material of construction - PVDF
  • Capacity - dual 125 mm (5") wafer cassettes
  • 360º overflow
  • Pump Motor, 120v
  • Manual Drain Valve
  • Removable motor cover (shroud)
  • Lift-off cover
     
      Options
  • Teflon Immersion (TFB-Process Tecnology) Heater
  • Process Temperature Controller
  • Cooling coils (for sub-ambient operation)

Note:  Due to light conditions, pictures/module appear blue.

   6.10                      1          New NPP Entegris E200-S-01D-0215 (Natural Polypropylene)
                                                  OverFlow Bath

  • Material of construction - Natural Polypropylene
  • Capacity - single 200 mm (8") wafer carrier
  • Serrated 360º overflow
  • 1 piece design
  • 1" MNPT Center Drain Port

Note:  Call or email for dimension confirmation

Section 7.0 - Misc.

  Item             Qty       PN, Description

  7.1           16-24        SOLD!!!   Wafer Carriers, Entegris - A192-80M-0215 (200mm, 25 slots per)   SOLD!!!

 7.2             70'+        PTFE Teflon Tubing (over 70') 1/8" OD, 1/16" ID
 7.3                  1         Magnetic Stirrer (CDA or Water Drive)
 7.4                 1         FSI Display Panel , GE Fanuc Fortress LT (FSI # 306224-001)

 7.5                 1         Power Meter - Electronic Power Meter 3720

Go to Page 1 for  Components,  Controllers, DI Water Heaters, Immersion Heaters & InLine Heaters